Burks Pump Catalog

Call: 1-866-484-1870
Email: info@burkspumpcatalog.com

Call or email us any time, any day to contact a friendly Burks pump expert for sales, service, and support. We have the largest inventory and prices that can't and won't be beat for the Burks pumps that you're looking for. Many of the pump part numbers ship same day!

Burks Turbine Pumps

• FEATURES
Cast Iron/ Bronze/ Stainless Steel construction Low Flow- High Pressure

• FOUR POSITION CASING
Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.

• ENCLOSED BRONZE IMPELLER
Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation and threaded onto stainless steel motor shaft.

• ENCLOSED GLASS FILLED NORYL® IMPELLER*
Of the latest hydraulic design for maximum efficiency, impeller has molded in brass insert threaded onto stainless steel motor shaft. *Noryl® Impeller is not designed for use with hydrocarbons.

• MECHANICAL SHAFT SEAL
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034 kpa). Ceramic seat and carbon seal face for long trouble-free service. Special seals are available for higher temperatures and fluids other than water.

• MOTORS
Standard pump motors are of open drip proof (ODP) construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction.

• FACTORY TESTED
After careful assembly and inspection, EVERY pump is factory tested and meets Hydraulic Institute standards.

Call: 1-866-484-1870 for prices that can't and won't be beat!
Email: info@burkspumpcatalog.com

Click for the complete line of burks pumps

back to top

Burks Centrifugal Pumps

• FOUR POSITION CASING. Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.

Call: 1-866-484-1870 for prices that can't and won't be beat!
Email: info@burkspumpcatalog.com

back to top

Burks Centrifugal Pumps

• FOUR POSITION CASING
Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.

• ENCLOSED BRONZE IMPELLER
Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation and threaded onto stainless steel motor shaft.

• ENCLOSED GLASS FILLED NORYL® IMPELLER*
Of the latest hydraulic design for maximum efficiency, impeller has molded in brass insert threaded onto stainless steel motor shaft. *Noryl® Impeller is not designed for use with hydrocarbons.

• MECHANICAL SHAFT SEAL
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034 kpa). Ceramic seat and carbon seal face for long trouble-free service. Special seals are available for higher temperatures and fluids other than water.

• MOTORS
Standard pump motors are of open drip proof (ODP) construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction.

• FACTORY TESTED
After careful assembly and inspection, EVERY pump is factory tested and meets Hydraulic Institute standards

Call: 1-866-484-1870 for prices that can't and won't be beat!
Email: info@burkspumpcatalog.com

back to top

Burks Self Priming Pumps

• FOUR POSITION CASING
Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.

• ENCLOSED BRONZE IMPELLER
Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation and threaded onto stainless steel motor shaft.

• ENCLOSED GLASS FILLED NORYL® IMPELLER*
Of the latest hydraulic design for maximum efficiency, impeller has molded in brass insert threaded onto stainless steel motor shaft. *Noryl® Impeller is not designed for use with hydrocarbons.

• MECHANICAL SHAFT SEAL
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034 kpa). Ceramic seat and carbon seal face for long trouble-free service. Special seals are available for higher temperatures and fluids other than water.

• MOTORS - Standard pump motors are of open drip proof (ODP) construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction.

• FACTORY TESTED
After careful assembly and inspection, EVERY pump is factory tested and meets Hydraulic Institute standards.

Call: 1-866-484-1870 for prices that can't and won't be beat!
Email: info@burkspumpcatalog.com

back to top

Other Burks Pumps

Call or email now for the following Burks pumps. If you don't see the pump that you're looking for, try our Additional Burks Pump List or call us.

• CR
• CS
• CT
• DF4-1 1/4
• DF6-2 1/2
• EC/ ED
• ES
• ET
• G5-1 1/4
• G6-1 1/4
• G6-1 1/2 thru 4G9-4
• GA4-3/4--GA41-1/2
• GA5-1 1/4 & GA6-1 1
• GA5-1 Series
• GA6-1 1/2 & GA6-2
• GA7-1 1/2
• GA7-1 1/4 Series
• GNA
• GNB
• GNC
• GV
• GV6 Flange Mount
• GWT Engine Driven
• Repair Kits
• Series GB In-Line
• WA6
• WG6-2
• WPT
• WST
• WT
• GNA5-1 1/4
• GNA6-1 1/4

Copyright 2009-2010. Burks Pump Catalog. © All Rights Reserved.
Call 1-866-484-1870 Disclaimer
E-mail: info@burkspumpcatalog.com